June 19, 2023
Before that, we had an article that mentioned exquisite wiring technology in Germany. Many asked editor: is there no such wiring in our electrical wiring? Of course, it's time for everyone to experience true spirit of artisan.
Weak ongoing integration project behind Sichuan-Tibet Railway Station, Chengdu-Yaan Section of 12th Bureau of China Railway.
Strictness is not a patent of Germans, and Chinese engineers are also very good!
Then question is, how can I wait for masses to say goodbye to Pansy's hole?
Main Equipment Wiring Specification
The IDC core network equipment, especially core intranet equipment, will have more optical fibers due to number of TOR interconnections. The fiber optics of core network equipment must be laid neatly and cannot be interspersed horizontally and vertically.
Optical fiber is laid vertically on left or right side of equipment, and location of its installation cannot block air inlet and outlet of network equipment. The optical fibers are tied with velcro straps at intervals (note: white straps cannot be used to secure them), but bundles should not be too tight, and degree of bending should not be too large, between 100 and 130 degrees, usually about 110 degrees, in order to have ability to relax freely, attach label, try not to block label after it is connected to port of device, and leave a certain length of space to facilitate insertion and insertion of optical fiber.
Intranet connection specification
The internal network access switch is located at top of rack. The 40G MPO fiber of internal network TOR switch is connected to internal network core, and 10G-AOC cable is connected to server. The 1G or 10G port of ILO switch is connected to core of control network, and Gigabit port is connected to server. Each of two cabinets in computer room has a common intranet TOR and one ILO access switch, and approximately 18 servers are housed in each cabinet.
Cables routed by intranet access switch are organized through a cable manager. On cable manager, every 4 network cables are tied with cable ties. Each network cable is labeled with a unique label and other end is placed in tray position in rack. The length of optical fiber to be lowered should not be too long, and degree of bending should not be too large. Labeled optical fibers that are connected to different cores should be highlighted as much as possible with marks of different colors.
Axle frame wiring specifications
Connecting cables between network devices in machine room must be routed through bridges, with exception of single cabinets. Optical fibers and network cables in bridges are stacked separately and neatly and tied with cable ties at regular intervals to keep them beautiful.
Code for cabinet wiring
The cabinet (normal server cabinet) mainly contains AOC intranet cables, ILO network management cables, and power cables. Therefore, there will be a large number of cables in one cabinet, and each type of cable must be bundled and routed inside cabinet.
Various ra cablesdiffer in color, for example, internal network cable: blue, ILO cable: gray, power cable: black, reserved cable length should not be too long, and it can be connected on one side of PDU. to other side of PDU That's it, cables that are too long will affect cable management.
Have you already learned this? The wiring specification not only looks beautiful, but also reflects power level of our low current technicians. When customers see such a computer room, what else can they say besides satisfaction? The boss saw such a computer room, you are not far from an increase in salary and promotion.
