June 06, 2023
Everyone involved in construction industry knows that in building technology of building automation mechanical and electrical equipment, most important thing is to improve construction technology and strengthen quality control and supervision, which is also key to project quality assurance. Therefore, enterprises will pay attention to some technical key points when installing electromechanical equipment. So, what are key technical points when installing electromechanical equipment for building automation systems?
Internal installation of lower pressure junction box
In interior of smart building, a low-pressure junction box should be installed, and surface of junction box should be painted with smooth and clean paint, and logo of junction box should be put on most prominent place. And fix frame of junction box so that ensure that some electrical appliances will not be installed under junction box during installation. This approach can effectively prevent junction box of a large amount of current from burning out when switching electrical appliances, which can lead to serious accidents in terms of safety. Therefore, when installing junction box, it is first necessary to set up a fireproof and explosion-proof device to ensure safety of junction box.
Outdoor waterproof switchboard
When installing junction box outdoors in a smart building, full consideration must be given to whether place where it is installed is protected from rain and whether a rain-proof cover can be installed. Assuming that it is in a public place, it is also necessary to consider how to install door of fixed box of junction box, and after installation is completed, it should be equipped with a lock to ensure normal and safe operation of junction box and avoid man-made damage and other dangerous accidents.
System installation of electromechanical equipment
In whole process of installation of electromechanical equipment, most important link in installation is electromechanical system, and quality of its installation directly affects normal operation of electromechanical equipment. Therefore, in installation process, it is necessary to strictly adhere to installation norms and technology of standardized operations. After installation of electromechanical system and before use, in order to ensure normal operation and safety of electromechanical system, electromechanical system must first adjust and adjust. Trial run to achieve good quality requirements. The whole debugging process consists of four stages: one is preparatory work before debugging, other is trial operation of electromechanical system, third is debugging during operation, fourth is shutdown of electromechanical system. Before commissioning, check all data, confirm whether environment conditions are suitable for trial operation of electromechanical equipment, and check whether capacity of power supply system can support requirements of normal operation of electromechanical system. It is only by well coordinating these four steps that it can be determined whether electromechanical equipment meets performance requirements and quality of standard electromechanical equipment.th system.
Equipment selection and requirements
In process of designing electromechanical equipment, selection of electromechanical equipment is extremely important, so it is necessary to choose equipment produced by professional electromechanical enterprises, and selected equipment must have high quality requirements, so how to help quality of installation project Supervision. In addition, scientific installation should be carried out according to type of electromechanical equipment and area of use. Based on engineering design, it is also necessary to consider whether electromechanical equipment has waterproof, anti-shock and other functions, and comprehensively consider performance and quality of electromechanical equipment, so as to prevent foreign objects from damaging electromechanical equipment. . The installation process must also be provided by professional technical personnel, so that quality and performance of installation can meet relevant requirements of standard.
Monitoring installation progress
The installation process is a key factor influencing quality of an electromechanical installation. In process of managing installation link, most important thing is to optimize mode and stages of monitoring and installation link, as well as to improve quality and professional technical level of supervisors. During installation, supervisors must follow installation instructions and determine each step on site to avoid any possible errors that could damage electromechanical equipment, thereby reducing efficiency of electromechanical equipment. At same time, it is also necessary to use a modern network monitoring platform to comprehensively monitor construction and installation process.
Observation of installation work
During implementation of an installation project, supervisors must also provide comprehensive oversight and management of entire project, such as inspecting appropriate building materials and keeping records of number and type of electromechanical equipment used. At same time, supervisors must produce detailed engineering reports, estimate quantities of various materials needed for project, and compare them with final actual quantities in order to avoid errors in some links and ensure quality of project.
Installation quality control
The key point of construction technology for installation of electromechanical equipment in intelligent building automation control system is quality control, which is also key point of construction technology for entire electromechanical project. Therefore, it is necessary to carry out quality supervision and control at all links and stages of construction, carefully supervise and inspect some hidden construction links or technological processes, strengthen control over weak links in construction, and if this affects post-process, it should be checked in time, and problems existing in construction should be detected in time and solved in time. At same time, installation quality of mechanical and electrical equipment should be improved by combining advanced science and technology and construction technology.
In installation and assembly process of electromechanical equipment in building automation systems, construction technology and quality control are most important content, and they are most important factors affecting service life of electromechanical equipment and economic benefit of everything. company. Therefore, it is necessary to focus on use of these two aspects, from technological innovation and quality control, and commissioning and installation of electromechanical equipment, to do a good job of supervision and inspection of each link and step, and improve standards and quality of installation of electromechanical equipment, promote enterprises in increasing economic efficiency and competitiveness in market.
