May 03, 2023
Fiber optic communication is widely used due to advantages of high speed, wide bandwidth, anti-interference, strong privacy and long distance transmission. Fiber to home not only provides network services, but also includes Internet TV and telephone services. So how do you make wiring more practical once fiber is brought into the home?
Wiring after FTTH
Develop a network plan
Before connecting entire home network, you need to make a network plan according to your home network needs. Which room has which Internet TV, which room needs Internet, and which room needs a telephone, everything must be planned. And planning should be professional and forward-looking. Do not put off new needs that may arise in future due to short-term problems. After all, wiring is a hidden project. Once network cable is deployed, it is difficult to modify it later.
For example, considering expansion of network services in future, it is best to run 3 network lines from optical modem to living room, one network line carries Internet services, another network line carries Internet TV services, and other network line is reserved if you need to install desk phone, it is recommended to add another network cable for desk phone data.
The router does not install a low-current box
Many people are used to putting routers and other equipment in weak boxes, which is a very unwise and unprofessional plan. Given beauty and practicality, low-current box is only suitable for light cats. It is better to place wireless router in living room, and then collect all wires in living room and connect it to wireless router.
Use Category 6 or Super Category 6 wiring
At present, network bandwidth has reached 200M, and selection of network wiring characteristics is mainly carried out in accordance with this standard. At present, network speed continues to increase, and gigabit broadband access is an inevitable trend. Although Category 5e cables can work in Gigabit networks, it is safer to choose Category 6 cables or even Category 6 cables from a stability point of view.
When wiring network from living room to each room, it is recommended to run two network cables, one for Internet use and one for backup. In order to look good, we recommend using an 86 type network panel, using a Gigabit network module, wires must be screwed into electrical wire. Due to thickness of six wires, it is highly recommended to run each conduit through one conduit.
Main points to pay attention to when connecting network cables
Avoid sharp bends
When connecting, pay attention to unplug it first and don't turn it at a right angle without breaking it. This can easily cause line to fail and also greatly affect signal. .
Unused strings should be linked separately
To prevent signal interference, network cables, telephone lines, cable TV lines and other lines must be laid separately during construction.
The route should not be too difficult
When laying pipeline, space inside pipeline should not be filled with wires, application rate of straight pipe diameter should be 50%-60%, and application rate of bent pipe diameter should be 40%-50% in one channel. The number of threads must not exceed 4
How to detect network cables
The only way for a user to determine if a network cable is in place is to simply use "ping" network discovery command to test network connection when all wiring is complete. All wiring work is considered qualified. .
Actually, once network wiring is complete, it's not as easy as just checking if network is connected. You also need to check if network transmission speed reaches nominal value of network product. is greatly reduced. In addition, we must pay attention to comprehensive test of organized network cable system. For example, use network cable tester to see connection sequence of 8 cables in network cable and check whether test is connected. data is correct, network wiring can be identified, it is in place.