October 09, 2023
(1) Concept
Unlike conventional bridges, mesh bridge is a new type that has emerged in recent years. Compared with traditional bridges, its advantages in use are more obvious. The grid bridge concept was proposed by Europeans and first started to be used. It was gradually introduced in China after 2004. Most of customers who first applied it were Chinese affiliates of large foreign enterprises. In recent years, large Chinese enterprises have gradually followed and used it. I believe that in near future it will appear in bridge industry.
(2) Benefits
(1) The open mesh bridge type makes all cables visible, which requires better wiring quality. In event of a failure, problem cable can be quickly identified and appropriate action taken. And because cables naturally ventilate and dissipate, heat doesn't build up, and cables with a smaller cross-sectional area can be used, thereby reducing cable procurement costs. (2) The network bridge can be connected from anywhere, which is very convenient for connecting to various machines and equipment, and exit point can also be changed at will; it is easy and flexible to install, and can be installed on top, bottom and peripheral parts of production equipment. It is easy to walk among various equipment and install along production line and assembly line. And because it's completely open, mice can't nest.
(3) The frame of bridge is strong, safe and durable. Changpeng lattice bridge is welded with high quality high quality wire, and it is most tested bridge in world, providing users with strongest bearing capacity with lightest dead weight. The bearing capacity of Changpeng mesh bridge (without any support in middle of 3 meters) is not less than 172 kg. In addition to surface treatment such as zinc plating, hot dip galvanizing, and plastic spraying, Changpeng mesh bridges and accessories are also made of high-quality 304 series stainless steel that has undergone decontamination treatment. After salt spray testing, surface life is same as that of untreated stainless steel, three to four times higher, which ensures a long service life even in harsh environments.
(4) Strong fire resistance. It can also be held for 90 minutes at a high temperature of 1000 degrees Celsius to protect safety of bridge. (5) Flexible and easy installation, convenient maintenance - Changpeng bridge products can freely produce a variety of elbows, tees, crosses, etc. on site, greatly reducing installation time, mesh bridge quick installation system, such as: quick connection Two straight sections of bridge can be quickly connected without bolt and nut, which saves at least 1/3 of installation time compared to a traditional bridge and allows you to complete project on time.
(3) Comparison between a lattice bridge and a traditional bridge
(1) Improved ability to upgrade and maintain system, leaving room for upgrades to stay in Europe.
(2) It can be applied flexibly in integrated wiring system, and is suitable for top and bottom wiring of mounting bridge.
(3) Maintenance of lines and equipment is very fast and safe.
(4) Save on repeat investment.
(5) Its own weight is only 1/5 that of a conventional bridge.
(6) AbbreviationReduce installation time by 2/3 compared to traditional bridges.
(7) The electrical wiring system and working environment are cleaner, more hygienic and more beautiful.
(8) The mesh mechanism dissipates heat better and effectively prolongs service life of cable.
(4) Function
(1) Open mesh bridge allows wires to exit from anywhere
It can be easily connected to various machines and equipment, and exit point can be changed at will, it is lightweight and flexible, it can be installed on top, bottom and periphery of production equipment, and it can be easily walked among various equipment.Installed along production line and assembly line.
(2) Open mesh bridge makes all cables visible
The quality of a wiring project can be fully controlled, and in case of failure in future, a problematic cable can be quickly identified and corrected. And because cables naturally ventilate and dissipate, heat doesn't build up, and cables with a smaller cross-sectional area can be used, thereby reducing cable procurement costs.
(3) Strong firing characteristics.
It can also be stored for 90 minutes at a high temperature of 1000 degrees Celsius to protect safety of bridge.
(4) Strong, safe and durable.
The lattice bridge is welded from high quality steel wire. It is most proven bridge in world, providing users with highest load-bearing capacity at lowest dead weight. The bearing capacity of mesh bridge is at least 172 kg without support in middle of 3 meters. In addition to surface treatments such as electro-galvanizing, hot-dip galvanizing and plastic spraying, lattice bridges and accessories also provide a high-quality series of decontaminated stainless steel products. After salt spray testing, surface life is three to three times longer than in untreated stainless steel. Four times longer service life is guaranteed even under harsh conditions.
(5) Flexible and easy installation, convenient maintenance.
Mesh bridge products can freely produce a variety of elbows, tees, crosses, etc. on site, greatly reducing installation time. Mesh bridge quick installation system, such as: quick-connect and quick-release belt buckle, two jumpers, straight sections can be quickly connected without screws and nuts, saving at least 1/3 installation time compared to traditional bridges, allowing project to be completed on time
The open bridge is very convenient to use in computer room, especially in micro module computer room, because movement, extension, reduction and replacement of cables in computer room is very frequent, and it is often upgraded and expanded. If a wire slot is used where two bridges connect, each interface has at least 8 screws and nuts and no more than 16. If you want to make any changes, you must first tighten screws and nuts and remove cover; modification completed The cover must then be reinstalled. Cabofilnet cable tray is a completeNew open design, which can directly carry out various modifications of cables. Another big issue with conduit applications is that transition pieces of various elbows, tees, crosses, reduction diameters, height differences, etc. must be carefully measured before being sent to factory for special adjustment and all of these Cabofil transition pieces are in It can be cut and processed right on construction site, and any installer can master cutting and processing method with a simple ten-minute training.
(6) Excellent load-bearing capacity Although mesh bridge is lightweight, it does not reduce important load-bearing characteristics. The bridge frame uses 4-6mm diameter high-quality steel wire to optimize configuration and mixing according to principles of mechanics, and uses a custom-made special welding machine for horizontal and vertical cross welding and T-welding. side chords and top chords to achieve performance of each welding point. Withstand 500kg tension. The safe T-edge formed by T-welding is global patent of mesh bridge, which avoids sharp end of welding point, not only can protect cable, but is also safer for construction and installation personnel. (7) There are various surface treatment options for durable mesh tray. Among them, thickness of zinc layer of electro-galvanizing is 12-18 microns, and thickness of zinc layer of hot dip galvanizing is 60-80 microns, and coating is uniform and has excellent corrosion resistance. For some special environments, mesh bridges can also be made from passivated bridges and high quality 304L and 316L stainless steel bridges and accessories, which really guarantee durability of product.
